|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
P-Channel Enhancement Mode MOSFET General Purpose Amplifier IT1700 FEATURES CORPORATION * Low ON-Resistance * High Gain Voltage * Low Noise Impedance * High Input * Low Leakage PIN CONFIGURATION ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise specified) Drain-Source and Gate-Source Voltage . . . . . . . . . . . . . -40V Peak Gate-Source Voltage (Note 1) . . . . . . . . . . . . . . . 125V Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA Storage Temperature . . . . . . . . . . . . . . . . . . -65oC to +200oC Operating Temperature Range . . . . . . . . . . . -55oC to +150oC Lead Temperature (Soldering, 10sec) . . . . . . . . . . . . . +300oC Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375mW Derate above 25oC . . . . . . . . . . . . . . . . . . . . . . . . 3mW/ oC NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. TO-72 ORDERING INFORMATION Part C G S D Package Hermetic TO-72 Sorted Chips in Carriers Temperature Range -55oC to +150oC -55oC to +150oC IT1700 XIT1700 1503 IT1700 CORPORATION ELECTRICAL CHARACTERISTICS (TA = 25oC and VBS = 0 unless otherwise specified) SYMBOL BVDSS BVSDS IGSS IDSS IDSS (150 C) ISDS ISDS (150 C) VGS(th) rDS(on) IDS(on) gfs Ciss Crss Coss o o PARAMETER Drain to Source Breakdown Voltage Source to Drain Breakdown Voltage Gate Leakage Current Drain to Source Leakage Current Drain to Source Leakage Current Source to Drain Leakage Current Source to Drain Leakage Current Gate Threshold Voltage Static Drain to Source "on" Resistance Drain to Source "on" Current Forward Transconductance Common Source Small Signal, Short Circuit, Common Source, Input Capacitance Small Signal, Short Circuit, Common Source, Reverse Transfer Capacitance Small Signal, Short Circuit, Common Source, Output Capacitance MIN -40 -40 MAX UNITS V V TEST CONDITIONS VGS = 0, I D = -10A VGS = 0, I D = -10A (See note 2) 200 0.4 400 0.8 -2 -5 400 2 2000 4000 5 1.2 3.5 pA A pA A V ohms mA S pF pF pF VGS = VDS, I D = -10A VGS = -10V, VDS = 0 VGS = -10V, VDS = -15V VDS = -15V, ID = -10mA, f = 1kHz VDS = -15V, ID = -10mA f = 1MHz (Note 3) VDG = -15V, I D = 0 f = 1MHz (Note 3) VDS = -15V, ID = -10mA f = 1MHz (Note 3) VGS = 0, VDS = -20V NOTES: 1. Device must not be tested at 125V more than once nor longer than 300ms. 2. Actual gate current is immeasurable. Package suppliers are required to guarantee a package leakage of < 10pA. External package leakage is the dominant mode which is sensitive to both transient and storage environment, which cannot be guaranteed. 3. For design reference only, not 100% tested. |
Price & Availability of XIT1700 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |